Home » Shop » Electronics » HAGiBiS NVMe SSD Enclosure with E-Ink Display, 10Gbps

HAGiBiS NVMe SSD Enclosure with E-Ink Display, 10Gbps

$65.99

112 in stock

Estimated delivery: Dec 4, 2026 – Dec 9, 2026
SKU: GZ-32574 Category:
Description

NVMe SSD Enclosure with E-Ink Display: Your SSD's Status Always in View

This HAGiBiS NVMe SSD enclosure with an E-Ink display turns your M.2 SSD into a portable external drive with a USB-C connection of up to 10Gbps. Its display also shows the drive's name, capacity, health, and temperature, even when it's unplugged.

If you work with several external drives, you know the problem: they all look the same, and you end up plugging them in one by one to figure out which is which. With this enclosure, you give your drive a name ("BACKUP", "VIDEOS", "CLIENT-A") and see it at a glance, without plugging it in.

HAGiBiS NVMe SSD enclosure with E-Ink display and 10Gbps USB-C port

💡

Have an SSD you're not using?
If you swapped your laptop, PC, or Steam Deck SSD for a bigger one, this enclosure turns the old one into a USB-C external drive with speeds up to 10Gbps. It supports M.2 NVMe SSDs from 2230 to 2280, with M Key or B&M Key, up to 4TB. Plus, the screen shows what's on it without plugging it in.

An NVMe SSD Enclosure with a Display That Fits in Your Pocket

It combines an E-Ink display, a 10Gbps USB-C connection, a supercapacitor, and an aluminum body in a 115 × 51 × 12 mm enclosure weighing about 104 g. That makes it easy to carry in your pocket or laptop bag.

HAGiBiS feature overview: electronic ink, supercapacitor, 10Gbps and up to 4TB

NVMe SSD Enclosure with E-Ink Display: Identify Every Drive Without Plugging It In

What sets it apart is how much information it shows. Along with the name, you'll see SSD health data you'd normally only check with software on your computer:

  • Drive name and total capacity.
  • SSD health status.
  • Temperature.
  • Total data written.
  • Power cycles and power-on hours.
  • Supply voltage.

E-Ink keeps the image without using power, so the information stays visible after you unplug the enclosure. No software is needed: you set the name from your computer's file system, using up to 10 characters in English only (no accents or special characters). Just note that if the SSD is new, you'll need to format it as exFAT first.

SSD enclosure E-Ink display showing name, capacity, health, temperature and data written

USB-C Connection of Up to 10Gbps (USB 3.2 Gen 2)

It's great for moving videos, large projects, and backups without long waits. However, actual speed depends on the SSD you install, your device's port, and the type of files: 10Gbps is the interface's maximum, not a guaranteed figure in every case. It also works with USB 3.1 Gen 1 and USB 3.0 ports, though at lower speeds.

USB-C cable connected for high-speed transfers up to 10Gbps

Supercapacitor: Protection If It Disconnects Suddenly

If the cable comes loose or the power goes out mid-transfer, the supercapacitor delivers about 10 seconds of power so the SSD can shut down safely. It takes 5 to 6 minutes to charge; when the display shows READY, it's good to go.

It lowers the risk during a power loss, but it's no substitute for safely ejecting the drive or keeping backups.

HAGiBiS supercapacitor with READY indicator to protect data during power loss

Realtek RTL9210CN Chip

The Realtek RTL9210CN controller chip is the bridge between your SSD and your device, and it's what enables the USB 3.2 Gen 2 interface of up to 10Gbps. It's designed for low power consumption and broad compatibility with USB-C devices.

HAGiBiS Realtek RTL9210CN controller chip for stable performance

Which SSDs Does This NVMe Enclosure with a Display Support?

ProtocolNVMe (M.2 PCIe)
Sizes2230, 2242, 2260 y 2280
Compatible KeysM Key and B&M Key
Not CompatibleB-Key-Only SSDs
CapacityUp to 4TB
SSD IncludedNo, sold separately
Compatible with M.2 NVMe SSD sizes 2230, 2242, 2260 and 2280 with M Key and B&M Key

Aluminum Body for Heat Dissipation

NVMe SSDs heat up during long transfers. That's why the full aluminum alloy body works as a heat sink, helping maintain stable performance when you copy large files or use the drive for extended periods.

Open HAGiBiS aluminum body for efficient heat dissipation

An NVMe SSD Enclosure with a Display for Your Laptop, Tablet, or Phone

It works as an external drive with compatible laptops, tablets, and phones. For example, it's handy for carrying projects between devices, storing backups, or freeing up space on your phone.

If you record video on iPhone directly to the SSD: Western Digital SSDs may disconnect due to their high power draw. For that use, choose an SSD from another brand and check Apple's ProRes requirements.

NVMe SSD enclosure with display connected via USB-C to a phone, a tablet, and a laptop

We Tested It at Gizter

Tested by Gizter

  • 918 MB/sread
  • 238 MB/swrite over 31 GB
  • 37 °C (99 °F)after 10 min

We tested this NVMe SSD enclosure with display using a 256 GB Western Digital SN530 SSD formatted as exFAT. It feels premium in the hand: the body is aluminum and you can tell it's well made. Installing it was easy: the box includes screwdrivers, two thermal pads, the cable and spare screws for both the enclosure and the SSD. On a Mac, Blackmagic Disk Speed Test measured about 918 MB/s read, practically the top speed of a 10 Gbps connection, and write speeds were enough to record and edit 4K video straight from the drive.

To test a long workload, we wrote a single 31 GB file: it took 2 minutes and 12 seconds, about 238 MB/s sustained. After about 10 minutes of continuous testing, the enclosure's own display showed about 37 °C (99 °F), read speed held steady and it didn't feel hot to the touch. Write speed depends on the SSD: ours has no DRAM, and one with DRAM is usually faster and more consistent.

We also connected it to an iPhone 17 Pro and an 11" iPad Air M3: it showed up in the Files app and we copied and pasted videos without installing anything. We renamed the drive on the Mac and the E-Ink display updated it, along with the SSD's capacity, health, temperature and total data written. Best of all, all that information stays visible even when it's unplugged, so you know which drive it is and what condition it's in without plugging it in.

What we didn't love: the included cable is USB-C to USB-C and it's short, about 15 cm (6 in). If you need more reach or want to plug it into a USB-A port, you'll need another cable.

What Customers Are Saying


4.9 out of 5 · 15 verified reviews from international stores

As a recently launched model, there aren't many reviews yet, but the early ones agree: buyers especially praise the design and the E-Ink display, the quality of the aluminum body, and the great value for money.

Opinions on speed vary: some describe it as fast, others as average. This matches what we explained above: 10Gbps is the interface's maximum, and real-world performance depends on the SSD you install and your device's port.

Specifications

BrandHAGiBiS
ConectorUSB-C
InterfaceUSB 3.2 Gen 2, up to 10Gbps
Controller chipRealtek RTL9210CN
MaterialAluminum alloy, silver
DimensionsApprox. 115 × 51 × 12 mm
WeightApprox. 104 g
CableUSB-C to USB-C, 0.15 m
HAGiBiS NVMe SSD enclosure with display dimensions: 115 × 51 × 12 mm

What's Included

  • M.2 NVMe SSD enclosure with E-Ink display.
  • 0.15 m USB-C to USB-C cable.
  • Screwdrivers for installation.
  • 2 thermal pads for the SSD.
  • 6 enclosure screws (4 + 2 spare).
  • 2 SSD mounting screws (1 + 1 spare).
  • User manual.

The SSD is not included.

HAGiBiS box contents: USB-C to USB-C cable, screwdrivers, thermal pads, screws and manual

Frequently Asked Questions

No. It's just the enclosure, so you'll need a compatible M.2 NVMe SSD purchased separately.

Any M.2 NVMe SSD from 2230 to 2280, with an M Key or B&M Key connector and up to 4 TB. There's no need to pay for a PCIe 4.0 or 5.0 SSD: the enclosure tops out at about 1,000 MB/s over its 10 Gbps connection, so a PCIe 3.0 drive performs the same. What does matter is that it has DRAM if you'll be copying large files: in our test, a DRAM-less SSD read at 918 MB/s but wrote at about 238 MB/s sustained with a 31 GB file. If you plan to record video from an iPhone, avoid Western Digital SSDs.

It's designed for NVMe SSDs. B Key–only SSDs, on the other hand, aren't compatible.

Yes. E-Ink keeps the name displayed without power.

No. The E-Ink display shows your SSD's capacity, health, and temperature with no software or drivers. Just plug it in.

It works as an external drive with USB-C devices that recognize storage drives. If you install a new SSD, format it as exFAT first: it's the format Windows and Mac read without extra software. On phones and tablets, compatibility depends on whether the device supports external drives.

USB-C, with a USB 3.2 Gen 2 interface of up to 10Gbps. A USB-C to USB-C cable is included.

Not always. 10Gbps is the maximum for USB 3.2 Gen 2; actual speed depends on the SSD and your device's port.

No. The name supports English characters only, up to 10 characters.

Additional information
Weight0.15 kg
Dimensions12 × 8 × 6 cm
Reviews (0)
0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.